Disinfection-Surfaces

Disinfection Manufacturer Catalog here (pdf in English)
Disinfection-Surfaces
Disinfection-Surfaces

Quatrodes® Unit NF

A non-foaming preparation for simultaneous cleaning and disinfecting suction systems, amalgam separators and dental unit bowls. Quatrodes® Unit NF is intended for simultaneous cleaning and disinfection of suction systems, amalgam separators and dental unit bowls. The preparation does not foam. If used daily, it prevents biofilm from forming. It can also be used to disinfect closed circuits of whirlpool tubs which are medical devices. Intended to be used by professionals.

The concentrate should be diluted with water. In order to obtain 2% concentration, dilute 20 ml of the concentrate in 980 ml of water.

Active ingredients:
Amine, quaternary ammonium compounds

Data Sheet

Packing unit:
1L bottle with doser, 5L canister


Medi Spray Teatonic

Medi Spray Teatonic

Ready-to-use formula for rapid disinfection of small surfaces of medical equipment. Medi Spray is recommended for the disinfection of small medical-equipment surfaces, including beds and treatment hairs, medical and operating appliances, rehabilitation equipment, patient lockers, slabs and other hard-to-access areas. Particularly recommended for glass and shiny surfaces. It may be used on surfaces which come in contact with food. Spray the surface from a distance of about 30 cm, making sure that the surface is fully covered. Then wipe the surface with a paper towel. The surface does not need to be rinsed with water and dries quickly without leaving smudges. Do not apply on alcohol-sensitive surfaces (e.g. acrylic glass). The product is intended for professional users.

Active ingredients:
63,7 g etanol
6,3 g propan-2-ol

Data Sheet


Medi Spray Neutral

Medi Spray Neutral

Ready-to-use formula for rapid disinfection of small surfaces of medical equipment. Medi Spray is recommended for the disinfection of small medical-equipment surfaces, including beds and treatment hairs, medical and operating appliances, rehabilitation equipment, patient lockers, slabs and other hard-to-access areas. Particularly recommended for glass and shiny surfaces. It may be used on surfaces which come in contact with food. Spray the surface from a distance of about 30 cm, making sure that the surface is fully covered. Then wipe the surface with a paper towel. The surface does not need to be rinsed with water and dries quickly without leaving smudges. Do not apply on alcohol-sensitive surfaces (e.g. acrylic glass). The product is intended for professional users.

Active ingredients:
63,7 g etanol
6,3 g propan-2-ol

Packing unit:
1L spray bottle, 5L canister

Scent:
Tea tonic

Data Sheet


Quatrodes® Extra

Quatrodes® Extra

Concentrate for cleaning and disinfection of surfaces

Quatrodes® Extra is a highly efficient product for simultaneous cleaning and disinfection of surfaces of medical devices and large washable surfaces, such as units, medical beds, floors or walls. Due to its high material compatibility it is suitable for disinfection of upholstery materials and goods made of ABS plastic, glass, porcelain, metal, rubber, wood, aluminium, stainless steel, nickel or chromium. Recommended for disinfection of surfaces of medical equipment, respiratory equipment and goods made of acrylic glass. Due to the broad germicide spectrum can be applied on the high risk areas such as in hospitals and clinics. Also suitable for cleaning and disinfection of medical devices by immersion. It can also be applied on surfaces having contact with food. It does not contain aldehydes or phenols and therefore does not cause allergic reactions nor discolour surfaces. It has a pleasant floral scent. The concentration level depends on a desired spectrum and duration of action. 1 liter bottle contains integrated dispenser. In order to obtain a concentration of 0,5% dilute 5 ml of the concentrate in 995 ml of water. Disinfected surfaces do not require rinsing with water. 

Data Sheet


Quatrodes® Forte

Quatrodes® Forte

Concentrate for cleaning and disinfection of surfaces.

Quatrodes® Forte is a product designed for simultaneous cleaning and disinfection of surfaces of medical devices made of glass, porcelain, metal, rubber, wood and aluminium. Quatrodes® Forte is a highly efficient formula of the concentrate for disinfection of surfaces of medical equipment and large washable surfaces such as units, medical beds, floors, walls. Also suitable for cleaning and disinfection of medical devices by immersion. Recommended for disinfection of surfaces of medical equipment, respiratory equipment, and goods made of acrylic glass. Thanks to the broad germicide spectrum can be applied in the high – risk areas such as hospitals and clinics. It can also be applied on surfaces having contact with food. It has a pleasant scent. Prepare a solution by diluting the agent with water. The choice depends on a desired concentration range and exposure time. 1 liter bottle has an integrated dispenser: 10 ml per 990 ml of water gives a concentration of 1%. The surface after disinfection does not require rinsing with water

Active ingredients:
amine, quaternary ammonium compounds

Data Sheet


Velox® foam extra

Velox® foam extra

Ready-for-use alcohol-free foam for cleaning and disinfection of alcohol-sensitive medical-equipment surfaces. Works in only 1 minute. The product has a double, foam and spray head. Application in foam form is recommended. Spray the surface from a distance of 20-30 cm, making sure it is fully covered. Remove excess foam using a paper towel. The surface does not need to be rinsed with water. Before disinfecting particularly sensitive surfaces (e.g. natural leather), it is recommended to test the preparation on a nonvisiblearea. Velox Foam® Extra is recommended for disinfecting a range of medical-equipment surfaces made of glass, porcelain, metal, rubber, plastics and acrylic glass. It is suitable for the disinfection of medical appliances, rehabilitation equipment, treatment chairs, incubators, lamps, etc., in intensive care units and operating theatres. Free from aldehydes and phosphates, the foam does not discolour the disinfected surfaces. It is suitable for use on surfaces which come into contact with food.

Active ingredients:
amine, quaternary ammonium compounds

1L spray bottle, 5L canister

Data Sheet


Velox® Top AF-neutral

Velox® Top AF-neutral

Ready-to-use formula for cleaning and disinfection of surfaces of medical equipment. Velox Top AF is a ready-to-use formula with a wide spectrum in microbiological activity combined with short contact times as well as highly effective cleaning and material preserving properties. Alcohol based formula designed for rapid disinfection of small surfaces of medical equipment, chairs, beds, and other difficult to access surfaces, as well as food related objects. Also recommended for disinfection of dental tips before sterilization and of prosthesis and silicone impressions. Free from aldehyde and phenol, does not discolour disinfected surfaces. Spread the liquid using disposable towels and allow to dry. The surface does not need rinsing with water, dries out completely and does not leave smudges.

Active ingredients:
Propan-2-ol, ethanol, amine, quaternary ammonium compounds

Packing unit:
1L spray bottle, 5L canister

Data Sheet


Velox® Top AF Grapefruit

Velox® Top AF Grapefruit

Ready-to-use formula for cleaning and disinfection of surfaces of medical equipment.

Velox Top AF is a ready-to-use formula with a wide spectrum in microbiological activity combined with short contact times as well as highly effective cleaning and material preserving properties. Spread the liquid using disposable towels and allow to dry. The surface does not need rinsing with water, dries out completely and does not leave smudges. Alcohol based formula designed for rapid disinfection of small surfaces of medical equipment, chairs, beds, and other difficult to access surfaces, as well as food related objects. Also recommended for disinfection of dental tips before sterilization and of prosthesis and silicone impressions. Free from aldehyde and phenol, does not discolour disinfected surfaces. There are fragrancefree, and grapefruit-and-mandarin-fragrance product options available. 

Active ingredients:
Propan-2-ol, ethanol, amine, quaternary ammonium compounds

Data Sheet


Disinfection Wipes

Velox® - wipes

Velox® – wipes

Alcohol-based-formula wipes for cleaning and disinfection of surfaces of medical equipment.

Take a tissue from the tub and wipe a surface to be cleaned and disinfected. Close the lid. After opening the packaging, use the tissues within 21 days. Do not use if a tissue is dry. Do not use on sensitive to alcohols areas (e.g. acrylic glass).

Presaturated with an alcohol-based formula, Velox® Wipes is a cleaner and disinfectant in one. Dedicated for rapid disinfection of small surfaces of medical equipment, chairs, beds, dental ends before the sterilisation process and prosthetic spoons and silicon moulds. Also recommended for surfaces having contact with food. Free from aldehyde and phenol, does not discolour disinfected surfaces. 

Active ingredients:
Propan-2-ol, ethanol, amine, quaternary ammonium compounds

Packing unit:
refill bag with 100 tissues, plastic tub with 100 tissues

Data Sheet


Velox® Wipes NA

Velox® Wipes NA

Alcohol-free wipes for disinfection of alcohol-sensitive medical-equipment surfaces. Works in only 1 minute. Place a refill bag in the tub. Take a wipe out of the package and wipe the surface to be disinfected. Close the tub lid tightly. Once opened, a package of wipes should be used within 30 days. Do not use if the wipe is dry. The surface does not need to be rinsed with water after disinfection. Velox® Wipes NA are recommended for disinfecting a variety of medical-equipment surfaces made from plastic, acrylic glass, stainless steel, metal, aluminium, rubber and porcelain. Suitable for the disinfection of medical appliances, rehabilitation equipment, treatment chairs, incubators, the heads of ultrasound machines and lamps in intensive care units and operating theatres. Free from alcohol, aldehydes and phosphates, the wipes have a pleasant aroma and do not discolour surfaces.

Active ingredients:
amine, quaternary ammonium compounds

Packing unit:
refill bag with 100 tissues, plastic tub with 100 tissues

Data Sheet

MEDISEPT wipes

MEDISEPT wipes for hand and surface disinfection

High-quality alcohol wipes for disinfecting hands and all small alcohol-resistant surfaces. Efficient wipes for hands and surfaces with bactericidal, yeasticidal, mycobactericidal, tuberculocidal, and limited virucidal effect (e.g. herpes virus, HIV, hepatitis B and C viruses, and rotavirus). MEDISEPT Wipes for hand and surface disinfection are high-quality alcohol wipes for disinfecting hands and all small alcohol-resistant surfaces. They are recommended for surfaces such as tabletops, knobs, handles, seating surfaces, medical equipment, and accessories made of plastic, stainless steel, porcelain, and ABS plastic.

Dermatologically tested.

Active substance in 100 g of the product: Propan-2-ol 60 g, d-gluconic acid, compound with N,N”-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13- tetraazatetradecanediamidine (2:1) 0.5 g.

Packing unit: 50 pieces packaging

Wipe dimensions (mm): 190 x 150 mm